Pneumatic Pumping Oil Machine With Measuring Cup Car Engine Oil
Drainer
Access to the vacuum speed, negative pressure ability strong,
belongs to the utility model, or without lifting device or gutter,
are applicable, high transparency measuring cup, primary
observation was carried out on the oil and oil amount is
calculated. All functions using compressed air as the power,
guarantee the operation safety, environmental protection, low
consumption, using the negative pressure principle, memory and
measuring cup extraction vacuum negative pressure formed at the
same time, through the air, is not restricted by air line move,
recycling for many times, save time, improve work efficiency, is
necessary for car repair oil change.
| product name | Pneumatic Pumping Oil Machine With Measuring Cup Car Engine Oil
Drainer |
| vauum degree | 0-minus0.08mpa |
| air pressure | 8-10kg/cm |
| oil tank capacity | 80L |
| oil basin capacity | 10L |
| medium | lubricating oil |
| 4.5mm collecting speed | 0.8L/min |
| 6.5mm collecting speed | 1.6L/min |
| the greatest pressure | 4kg/c㎡ |
| barrel size | 50*43*93cm |
| G.W. | 19.5kg |
| N.W. | 17.5kg |
| cup size | 28*28*50cm |
| G.W. | 5.7kg |
| N.W. | 5kg |
Access to the vacuum speed, negative pressure ability strong,
belongs to the utility model, or without lifting device or gutter,
are applicable, high transparency measuring cup, primary
observation was carried out on the oil and oil amount is
calculated. All functions using compressed air as the power,
guarantee the operation safety, environmental protection, low
consumption, using the negative pressure principle, memory and
measuring cup extraction vacuum negative pressure formed at the
same time, through the air, is not restricted by air line move,
recycling for many times, save time, improve work efficiency, is
necessary for car repair oil change.
Our products mainly include electric oil, gear oil pump series,
spanner, tow rope, high pressure gas cylinder, high and low
position conveyor, pneumatic oil injector injector.
Do we accept customization?
Yes, we can accept customization.
Can you help us to do some change about your product?
Yes, special drawing and design will be evaluated by our technical
department, unit cost will be calculated by finance department for
your final confirmation. All procedures will be informed and
confirmed with you in advance.
Can I get a sample?
Yes. Samples are welcome to us before mass production. But few
extra cost and products cost will be charge from customer first,
and sample cost will be back to customer once started mass
production.You need to pay the express fee.
Are you a factory or trading company?
xianxian zhongtuo hardware tools co.,LTD is specialized in the
production and development of automobile repair tools,equipment and
sales as one of professional manufacturers.
